Table of Contents
Advertisement
Command Summary
The following table lists the commands to operate the configuration utility when the dome is installed
in an AD Up-the-Coax (AD-UTC) environment. The keyboard must be in programming mode to
perform these functions.
If you want to ...
Start the configuration utility.
Move the highlight bar on the active menu.
Select the highlighted item on the active menu.
Increase the value of the selected setting.
For example, Red or Blue white balance values.
Decrease the value of the selected field. For example, Red or Blue
white balance values.
Display the next choice for the setting. For example, Maximum
Zoom setting.
Display the previous choice for the setting. For example, Maximum
Zoom setting.
Save changes and exit the utility from any screen.
Setting Names / Working with Passwords
When setting names or entering password information, the screen displays the available characters in
the selected languages. In these situations, the following commands are used:
If you want to ...
Move the highlight left or right in the character field.
Move the highlight up or down in the character field.
Select the highlighted character in the character field.
Move the cursor to the right of the current character in the name
or password.
Move the cursor to the left of the current character in the name.
E–2
Use ...
F
,
(Function, and then Shift+Menu)
Use the Joystick
(Pan/Tilt)
or
(Focus Far or Focus Near)
(Zoom In) or
Twist joystick clockwise
(Zoom Out) or
Twist joystick counter-clockwise
(Zoom In)
(Zoom Out)
F
,
(Function, and then Shift+Clear)
Use ...
Joystick Left/Right
Joystick Tilt Up/Down
or
(Focus Far or Focus Near)
(Zoom In) or
Twist joystick clockwise
(Zoom Out) or
Twist joystick counter-clockwise
SpeedDome Ultra VII Day/Night Operator's Manual
+
+
Advertisement
Table of Contents
