Communication - Samson TROVIS 5757-3 Mounting And Operating Instructions

Design and principle of operation

3.1 Communication

Serial interface
The actuator is fitted with an RS-232 serial
interface. This allows communication with
TROVIS-VIEW using SSP protocol.
Configuration
The actuator is configured using the TROVIS-
VIEW software that enables the user to easily
configure the controller as well as view
process parameters online.
Note
TROVIS-VIEW can be downloaded free of
charge from our website at
u www.samsongroup.com > Service &
Support > Downloads > TROVIS-VIEW.
Further information on TROVIS-VIEW (e.g.
system requirements) is available on our
website and in the Data Sheet u T 6661 as
well as the Operating Instructions
u EB 6661.
EB 5757 EN 3-3