Notes On Possible Property Damage - Samson TROVIS 5757-3 Mounting And Operating Instructions

1.3 Notes on possible property damage

NOTICE
!
Risk of actuator damage due to the supply voltage exceeding the permissible toler-
ances.
The TROVIS 5757-3 Electric Actuator with Process Controller is designed for use ac-
cording to regulations for low-voltage installations.
Î Observe the permissible tolerances of the supply voltage.
Risk of actuator damage due to excessively high tightening torques.
The connection of the TROVIS 5757-3 Electric Actuator with Process Controller must be
tightened with certain torques. Excessive tightening torques lead to parts wearing out
more quickly.
Î Observe the specified tightening torques.
Risk of damage to the actuator by turning it too far.
The actuator stem of the electric actuators can be adjusted manually.
Î Move the actuator stem only as far as the bottom or top end position.
Malfunction due to a configuration that does not meet the requirements of the appli-
cation.
The electric actuator with process controller is configured for the specific application by
setting configuration items and parameters.
Î Perform the configuration for the specific application during start-up and after a re-
set to default settings.
EB 5757 EN
Safety instructions and measures
1-5