Receiving Faxes Manually: Manual Mode - Canon L380S User Manual

6
Press [ (-)] or [ (+)] to set the time the machine rings while waiting for someone to pick up the handset
➞ press [OK] twice.
F / T R I N G T I M E
You can use the numeric buttons instead of using [ (-)] or [ (+)] to set the time.
7
Press [ (-)] or [ (+)] to select <RECEIVE> or <DISCONNECT> ➞ press [OK].
F / T S W I T C H A C T I O N
This setting tells the machine what to do if no one picks up the handset within the specified ring time set in step 6.
8
Press [Stop/Reset] to return to standby mode.
NOTE
The default settings and selectable settings vary depending on the current country selection.

Receiving Faxes Manually: Manual Mode

7
To use this mode, you must have the optional handset or a telephone connected to the machine. In
Manual Mode, the machine rings every time it receives a call, whether the call is from a telephone or a
fax machine.
NOTE
Make sure the <REMOTE RX> setting in the <RX SETTINGS> menu is enabled. See p. 16-11 for details.
If you use your machine with Manual Mode, answer incoming calls as follows:
1
When the optional handset or the telephone rings, pick up the receiver.
● If you hear a person's voice:
❑
Start your conversation. If the caller wants to send a document after talking to you, ask them to press the start
button on their fax machine. When you hear a beep, press [Start] to begin receiving the document, then hang
up.
● If you hear a slow beep or silence:
❑
A fax machine is trying to send you a document.
Press [Start] on the machine, then hang up.
-or-
Enter the two-digit ID code from the telephone, then hang up.
7-4
Different Ways to Receive a Fax
F / T S W I T C H A C T I O N
➞
0 3 0 S E C
R X S E T T I N G S
➞
D I S C O N N E C T 3 . I N C O M I N G R I N G
R E C E I V E