Turning Memory Lock Off And Printing Documents - Canon L380S User Manual

The MEMORY LOCK RX menu includes the following items:
Setting
1.MEM LOCK PASSWORD
2.REPORT
OUTPUT NO
OUTPUT YES
The factory default setting is in bold face.
7
Press [Stop/Reset] to return to standby mode.

Turning Memory Lock OFF and Printing Documents

Follow this procedure to turn the Memory Lock 'OFF' and print the documents received in memory.
1
When the Memory Lock mode is 'ON', the message <MEMORY LOCK RX> is displayed on the LCD.
2
Follow the steps 1 to 5 of "Turning Memory Lock ON and Setting the Password" on p. 10-6 to turn the
Memory Lock 'OFF'.
If you have not set the memory lock password (see step 6 in "Turning Memory Lock ON and Setting the
Password" on p. 10-6), the LCD display shows <2.FAX DEFAULT>. The setting is completed and the documents
received in memory are printed.
3
If a memory lock password has been set, enter the memory lock password using the numeric keys ➞
press [OK].
When you press [OK], all the documents received in memory while the machine was in the Memory Lock mode
are printed. The memory lock mode is deactivated.
If you forget your password, your machine will require service to disable this feature.
Description
0 to 9999999
This password protects the Memory Lock
settings.
Setting a password is recommended. You
must use this password to unlock the
memory so you can print documents stored
in memory.
Use the numeric buttons to enter a
password (up to seven digits) ➞ press [OK].
Sets the machine to print reports. This
setting affects only reports that print
automatically, such as an Activity Report.
No report prints while in the Memory Lock
mode.
A report prints while the machine is in the
Memory Lock mode.
Using Memory Lock 10-7
10