Adjusting The Exposure (Density) - Canon L380S User Manual

Set the resolution as follows:
1
Press [FAX].
If you are already in the Fax standby mode, you can skip this step.
2
Press [Image Quality].
The LCD display shows the current resolution setting.
3
Press [Image Quality] repeatedly until the resolution you want is displayed ➞ press [OK].
F A X R E S O L U T I O N
4
Continue the operation you wish to complete.
If you do not proceed with any other operation, the LCD display returns to standby mode.

Adjusting the Exposure (Density)

You can adjust the lightness/darkness of the document pages before you scan for sending.
You can select the scanning density from the following:
•
<LIGHT> for documents with dark text or color.
•
<STANDARD> for normal printed or written text.
•
<DARK> for documents with light text or color.
1
Press [FAX].
If you are already in the Fax standby mode, you can skip this step.
2
Press [Exposure].
The LCD display shows the current exposure setting.
3 1 / 1 2 2 0 0 5 S A T 1 0 : 0 0
➞
F I N E F a x O n l y F I N E
Preparing to Send a Fax
6
6-5