Copying Problems; Telephone Problems - Canon FAX-TT250 User Manual

Canon fax-tt250 fax machine user's guide
Table of Contents

Advertisement

Copying problems

❏ The fax does not make a copy.
The ink film may need to be replaced.
• Determine if the problem is with the ink film and replace if necessary (see p. 48).
The document may not have been loaded correctly into the document feeder.
• Remove the document, stack it if necessary, and load it into the document feeder correctly (see p. 13).
• Make sure the operation panel is closed.
The ink film may not be installed properly.
• Make sure the ink film is installed properly (see p. 9).
❏ <MEMORY FULL> appears on the LCD when making multiple copies.
The fax's memory is full.
• Print or delete any documents stored in memory (see p. 56) to free up space in the fax's memory, then start again.
• If you have any page fed out without being copied, simply try copying those pages again.
• Change the scanning resolution and try copying again.
The document you are copying may have too many graphics.
• If multiple pages are being copied, separate the pages into smaller stacks. If not, make the desired number of copies one at a time
as needed.
For additional troubleshooting, see Print quality problems, p. 54.

Telephone problems

❏ You cannot dial.
The telephone line may not be connected properly.
• Make sure all line connections are secure (see p. 7).
The power cord may not be plugged in securely.
• Check that the power cord is plugged securely into the fax and into the wall outlet (see p. 8).
If the fax is plugged into a power strip, make sure the power strip is plugged in and turned on.
The fax may not be set for the type of telephone line in use (pulse/tone).
• Make sure the fax is set for the correct telephone line type (see p. 14).
❏ The handset, telephone, or extension phone disconnects while you are
talking.
The power cord may not be plugged in securely.
• Check that the power cord is plugged securely into the fax and into the wall outlet (see p. 8).
If the fax is plugged into a power strip, make sure the power strip is plugged in and turned on.
❏ There is interference on the line.
A mobile phone or cordless phone may be in use near the fax.
• Make sure that mobile phones and cordless phones are not used near the fax.
8
53

Advertisement

Table of Contents
loading

Table of Contents