Report Settings - Canon FAX-TT250 User Manual

Name
VOLUME CONTROL
KEYPAD VOLUME
ALARM VOLUME
LINE MONITOR VOL
RX CALL LEVEL
TEL LINE TYPE
R-KEY SETTING
PSTN
PBX

■ REPORT SETTINGS

Name
ACTIVITY REPORT
TX/RX SEPARATE
■ TX SETTINGS
Name
ECM TX
MID PAUSE SET
AUTO REDIAL
REDIAL TIMES
REDIAL INTERVAL
* Differs depending on the country.
Description
Set the volume of the fax sounds.
Set the volume of the keypad.
Set the volume of the error alarm sound.
Set the volume of the line monitor (sound during dialling).
Set the ring tone.
Set the dialling method the fax uses to match the type of phone line
you have.
Set the type of connection for your fax.
Your fax is connected to an outside line.
Set the access line type for the <PBX>. If you select <PREFIX>, you
can enter an outside line number of up to 19 digits.
Description
Set the function of the activity management report.
Divide the activity management report into sending and receiving
transactions.
Description
Enable/disable error correction during transmission.
Set the length of the pause you insert into a dialling sequence.
Determine whether the fax will redial a number if it fails to get a
response on the first attempt.
Set the number of retries.
Set the period of time between redialling attempts.
Settings
–
0 (off)/1/2/3
0 (off)/1/2/3
0 (off)/1/2/3
STANDARD/HIGH
TOUCH TONE/
ROTARY PULSE
PSTN/PBX
–
PREFIX/HOOKING
Settings
–
ON/OFF
Settings
ON/OFF
1 to 15 seconds*
ON/OFF
1 to 10 times*
2 to 60 minutes*
41
7