Mercedes-Benz C-Class 2014 Owner's Manual page 89

Protection against theft
86
To turn the alarm off with the key: press
X
the % or & button on the key.
The alarm is switched off.
or
Vehicles with KEYLESS-GO start-func-
X
tion or KEYLESS-GO: remove the Start/
Stop button from the ignition lock
( page 181).
Y
Insert the key into the ignition lock.
X
The alarm is switched off.
To stop the alarm using KEYLESS-GO:
X
grasp the outside door handle. The key
must be outside the vehicle.
The alarm is switched off.
or
Press the Start/Stop button on the dash-
X
board. The key must be inside the vehicle.
The alarm is switched off.
The alarm is not switched off, even if you
close the open door that has triggered it, for
example.
i
If the alarm stays on for more than
30 seconds, the Mercedes‑Benz emer-
gency call system automatically sends a
message to the Customer Assistance
Centre. This is done by means of a text
message or a data connection. The emer-
gency call system sends a message or
establishes a data connection provided
that:
you have subscribed to the
R
Mercedes‑Benz emergency call system
the Mercedes‑Benz emergency call sys-
R
tem has been activated properly
the necessary mobile phone network is
R
available
Tow-away protection
Function
An audible and visual alarm is triggered if your
vehicle's angle of inclination is altered while
tow-away protection is primed. This can occur
if the vehicle is jacked up on one side, for
example.
Priming
Make sure that:
X
the doors are closed
R
the boot lid is closed
R
Only then is the tow-away protection
primed.
Lock the vehicle with the key or KEYLESS-
X
GO.
Tow-away protection is primed after
approximately 60 seconds.
Switching off
Unlock the vehicle with the key or KEY-
X
LESS-GO.
or
Insert the key into the ignition lock.
X
Tow-away protection is switched off auto-
matically.
Deactivating
You can deactivate the tow-away protection
using COMAND Online or Audio 20. You can
find information about deactivating the tow-
away protection in the separate COMAND
Online or Audio 20 operating instructions.
Interior motion sensor
Function
When the interior motion sensor is primed, a
visual and audible alarm is triggered if move-
ment is detected in the vehicle interior. This
can occur if someone reaches into the vehicle
interior, for example.
Priming
Make sure that:
X