Mercedes-Benz C-Class 2014 Owner's Manual page 117

Sliding sunroof
114
G WARNING
The reversing feature especially does not
react to soft, light and thin objects, such as
small fingers. This means that the reversing
feature cannot prevent someone being trap-
ped in these situations. There is a risk of
injury.
When closing make sure that no parts of the
body are in the sweep of the roller sunblind.
If someone is trapped:
release the switch immediately or
R
during automatic operation, press the
R
switch briefly in any direction
The closing process is stopped.
Opening and closing roller sunblinds
Overhead control panel
To open
:
To open
;
To close
=
You can only close the roller sunblinds when
the panorama sliding sunroof is closed.
Turn the key to position 1 or 2 in the ignition
X
lock ( page 181).
Y
Press the 3 switch in direction :.
X
Both roller sunblinds open, then the sliding
roof is raised.
Pull the 3 switch in direction ;.
X
The sunblinds open
Pull the 3 switch in direction =.
X
The roller sunblinds close when the pano-
rama sliding roof is closed.
If you press or pull the 3 switch beyond
the point of resistance, automatic operation
is started in the corresponding direction. You
can stop automatic operation by pressing or
pulling again.
Resetting the panorama sliding sun-
roof or the front roller sunblind
Reset the panorama sliding sunroof or the
front roller sunblind if the panorama sliding
sunroof or the roller sunblinds does not move
smoothly.
Turn the key to position 1 or 2 in the ignition
X
lock ( page 181).
Y
Pull the 3 switch repeatedly to the point
X
of resistance in the direction of arrow :
until the panorama sliding sunroof is fully
closed.
Keep the 3 switch pulled for an addi-
X
tional second.
Pull the 3 switch in the direction of
X
arrow : repeatedly until the front roller
sunblind is closed.
Keep the 3 switch pulled for an addi-
X
tional second.
Make sure that the panorama sliding sun-
X
roof ( page 112) and the front roller sun-
Y
blind ( page 114) can be fully opened
Y
again.
If this is not the case, repeat the steps
X
above again.