Mercedes-Benz C-Class 2014 Owner's Manual page 313

Menus and submenus
310
Press a to confirm.
X
The current selection
tive tive is displayed.
To change the setting: press a again.
X
For further information about Lane Keeping
Assist; see ( page 261).
Y
For further information about Active Lane
Keeping Assist; see (
Head-up display submenu
Switching other displays on/off
This function is only available if the vehicle is
equipped with Navigation and/or Traffic Sign
Assist.
In the on-board computer, you can select
which contents are shown on the windscreen
when the head-up display is activated
( page 295).
Y
Use ò on the steering wheel to call up
X
the list of menus.
Press the : or 9 button on the steer-
X
ing wheel to select the
Confirm by pressing a on the steering
X
wheel.
Press the : or 9 button to select the
X
Head-up display Head-up display
Press a to confirm.
X
Press the : or 9 buttons to select
X
Display Display content content.
Press a to confirm.
X
Switching the Traffic Sign Assist display
on/off
Press the a button to save the setting.
X
When you activate the
Assist Assist display, recognised traffic signs are
shown on the windscreen when the head-
up display is activated.
Standard Standard or Adap‐ Adap‐
page 266).
Y
Settings Settings menu.
submenu.
Traffic Sign Traffic Sign
Switching the navigation messages dis-
play on/off
Vehicles with Traffic Sign Assist:
X
press : to select
sages sages.
Press the a button to save the setting.
X
When you switch on the
sages sages display, navigation messages are
shown on the windscreen when the head-
up display is activated.
For more information on navigation, see the
separate operating instructions.
Further information on Traffic Sign Assist
( page 256).
Y
Setting the position
You can adjust the position of the displayed
contents on the windscreen.
Switch on the Head-up display
X
( page 296).
Y
Use ò on the steering wheel to call up
X
the list of menus.
Press the : or 9 button on the steer-
X
ing wheel to select the
Confirm by pressing a on the steering
X
wheel.
Press the : or 9 button to select the
X
Head-up display Head-up display
Press a to confirm.
X
Use the : or 9 button to select the
X
Position Position function.
Press the a button to save the setting.
X
Use the : or 9 button to set the
X
position from Level +5 Level +5
Press the a or % button to save the
X
setting.
Using the Memory function, you can save and
call up the position of the head-up display as
a single memory preset (
Adjusting the brightness
You can adjust the brightness of the displayed
contents on the windscreen.
Navigation mes‐ Navigation mes‐
Navigation mes‐ Navigation mes‐
Settings Settings menu.
submenu.
to Level Level -5 -5.
page 130).
Y