Mercedes-Benz C-Class 2014 Owner's Manual page 252

Table of Contents

Advertisement

Select symbol ? using the Audio 20/
X
COMAND controller, see the Audio 20/
COMAND Online operating instructions.
The "Coupling up a trailer" function is selec-
ted. The distance specifications now only
apply to objects that are at the same level
as the ball coupling.
Reverse carefully, making sure that trailer
X
drawbar locating aid ; points approx-
imately in the direction of trailer drawbar
=.
Reverse carefully until trailer drawbar =
X
reaches red guide line.
The distance between the trailer drawbar
and the red guide line is now approximately
0.30 m.
Couple up the trailer (
X
Wide-angle function
Symbol for the wide-angle view function
:
Own vehicle
;
PARKTRONIC warning displays
=
You can also use the reversing camera to
select a wide-angle view.
When PARKTRONIC is operational
(
page 237), a symbol for your own vehicle
Y
appears in the Audio 20/COMAND Online
display. If the PARKTRONIC warning displays
are active, warning displays = light up in the
Audio 20/COMAND Online display in yellow
or red respectively.
page 284).
Y
Object detection
The reversing camera helps detect moving
and stationary objects. If an object (person,
vehicle or other obstacle) is detected, this
object is marked with a bar. Objects located
some distance from the vehicle away are
marked with a yellow bar. If the distance to
the object is very small, the bar is displayed in
red.
Object detection only works in full screen
mode.
To ensure that you can use the function, it
must be switched on in Audio 20/COMAND
Online, see the separate operating instruc-
tions.
360° camera (surround view)
General notes
The 360° camera is a camera system that
consists of four cameras.
The system evaluates images from the fol-
lowing cameras:
reversing camera
R
front camera
R
two cameras in the exterior mirrors
R
The cameras cover the immediate surround-
ings of the vehicle. The system assists you,
e.g. when parking or at exits with reduced
visibility.
You can show pictures from the 360° camera
in full-screen mode or in seven different split-
screen views on the COMAND/Audio 20 dis-
play. A split-screen view also includes a top
view of the vehicle. This view is calculated
from the data supplied by the installed cam-
eras (virtual camera).
The seven split-screen views are:
top view and image from the reversing cam-
R
era (130° viewing angle)
top view and image from the front camera
R
(130° viewing angle without displaying the
maximum steering wheel angle)
top view and enlarged rear view
R
Driving systems
249
Z

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

C-class

Table of Contents