Mercedes-Benz C-Class 2014 Owner's Manual page 314

Switch on the head-up display
X
( page 296).
Y
Use ò on the steering wheel to call up
X
the list of menus.
Press the : or 9 button on the steer-
X
ing wheel to select the
Confirm by pressing a on the steering
X
wheel.
Press the : or 9 button to select the
X
Head-up display Head-up display
Press a to confirm.
X
Press the : or 9 button to select the
X
Brightness Brightness function.
Press the a button to save the setting.
X
Press the : or 9 button to set the
X
brightness from Level +5 Level +5
Level -5 Level -5 (dark).
Press the a or % button to save the
X
setting.
Light submenu
Switching the Intelligent Light System
on/off
Use ò on the steering wheel to call up
X
the list of menus.
Press the : or 9 button on the steer-
X
ing wheel to select the
Confirm by pressing a on the steering
X
wheel.
Press the : or 9 button to select the
X
Lights Lights submenu.
Press a to confirm.
X
Press the : or 9 button to select the
X
Intelligent Light System Intelligent Light System
If the Intelligent Light System Intelligent Light System
tion has been switched on, the cone of light
and the L symbol in the multifunction
display are shown in white.
Press the a button to save the setting.
X
When you activate the
System, you activate the following functions: System
Motorway mode
R
Active light function
R
Settings Settings menu.
submenu.
(bright) to
Settings Settings menu.
function.
func-
Intelligent Light Intelligent Light
Menus and submenus
Cornering light function
R
Extended range foglamps
R
If you set the dipped-beam headlamps for
driving on the right/left, the multifunction
display shows the Inactive for left- Inactive for left-
side traffic side traffic or Inactive for right- Inactive for right-
side traffic side traffic display message instead of
the Intelligent Intelligent Light Light System
the Lights Lights submenu (
play message will only appear if the setting for
driving on the left/right is set opposite to your
vehicle's country version.
Further information on the Intelligent Light
System ( page 138).
Y
Setting the dipped-beam headlamps for
driving on the left/right
This function is only available on vehicles with
the Intelligent Light System.
You can use this function to switch between
symmetrical and asymmetrical dipped beam
( page 134).
Y
Use ò on the steering wheel to call up
X
the list of menus.
Press the : or 9 button on the steer-
X
ing wheel to select the
Confirm by pressing a on the steering
X
wheel.
Press the : or 9 button to select the
X
Lights Lights submenu.
Press a to confirm.
X
Press : or 9 to select the
X
beams Setting for beams Setting for
You will see the selected setting:
side traffic side traffic or left-side left-side traffic
Press the a button to save the setting.
X
If you change the setting, conversion does
not take place until the next time the vehi-
cle is stationary.
If you set the dipped-beam headlamps for
driving on the right/left, then motorway
mode and the extended range foglamps are
unavailable. These are only deactivated if the
setting for driving on the left/right is set
opposite to your vehicle's country version.
System function in
page 311). This dis-
Y
Settings Settings menu.
Dipped Dipped
function.
right- right-
traffic.
Z
311