Installation; Positioning - Smeg Classica C92IPBL9-1 Translation Of The Original Instructions

5 Installation

5.1 Positioning

Heavy appliance
Crushing hazard
• Position the appliance into the cabinet
cut-out with the help of a second person.
Pressure on the open door
Risk of damage to the appliance
• Never use the oven door to lever the
appliance into place when fitting.
• Avoid exerting too much pressure on the
oven door when open.
Heat production during appliance
operation
Risk of fire
• Veneers, adhesives or plastic coatings
on adjacent furniture should be
temperature-resistant (not less than
90 °C).
This appliance may be installed next to
walls, one of which is higher than the
worktop, at a minimum distance of X mm
from the side of the appliance, as shown in
figures "A" and "C" relative to the
installation classes.
Installation
Any wall units installed above the
appliance's worktop must be positioned at
least Y mm from it. If a hood is installed
above the hob, refer to the hood instruction
manual to ensure the correct clearance is
left.
X
Y
Depending on the type of installation, this
appliance belongs to classes:
50 mm
750 mm
A - Class 1
(Free-standing appliance)
107