Smeg Classica C92IPBL9-1 Translation Of The Original Instructions page 31

Setting the time
If the time is not set, the oven will
not switch on.
On the first use, or after a power failure, the
digits will be flashing on the
appliance's display.
1. Hold down the clock button
seconds. The dot between the hours and
the minutes flashes.
2. The time can be set via the value
increase button and value
decrease button. Keep the button
pressed in to increase or decrease
rapidly.
3. Wait 7 seconds. The dot between the
hours and the minutes stops flashing.
4. The symbol on the display indicates
that the appliance is ready to start
cooking.
To change the time, hold down the
value increase
value decrease
same time for two seconds, then
set the time.
Use
Timed cooking
1. Keep the clock button
for two
2. Press the clock button
3. Use the value increase
4. Select a function and a cooking
5. Wait approx. 5 seconds without pressing
button and
button at the
At the end of cooking the heating elements
will be deactivated. On the display, the
flashes and the buzzer sounds.
6. To turn the buzzer off, simply press one of
Timed cooking is the function
which allows a cooking operation
to be started and then ended after
a specific length of time set by the
user.
the symbol appears.
display the symbol and the text
appear, alternating with the
current time.
decrease buttons to set the required
minutes of cooking.
temperature.
any button in order for the function to
activate. The current time and the
and symbols will appear on the
display.
symbol turns off, the
the programmer clock buttons.
pressed until
again. On the
and value
symbol
89