Smeg Classica C92IPBL9-1 Translation Of The Original Instructions page 32

7. Press the clock button
programmer clock.
It is not possible to set a cooking
time of more than 10 hours.
To cancel the set programming
press and hold down the value
increase
decrease
time and then turn the oven off
manually.
Programmed cooking
Programmed cooking is the
function which allows a cooking
operation to be started at a set
time and then ended after a
specific length of time set by the
user.
1. Set the cooking time as described in the
previous point "Timed cooking".
2. Hold the menu button
seconds.
3. Press the menu button
display will show the digits
and the text
while the symbol flashes (for
example, the current time is 17:30).
90
to reset the
and the value
buttons at the same
down for 2
again. The
in sequence,
Use
4. Use the
required minutes (for example 1 hour).
5. Press the menu button
sequence with the pre-set cooking
duration added to the current time (for
example, the cooking end time shown is
18:30).
6. Press the
cooking end time (for example, 19:30).
Bear in mind that a few minutes for
oven preheating must be added to
the cooking time.
7. Wait approx. 7 seconds without pressing
any button in order for the function to
activate. The current time appears and
the and
display.
8. Select a cooking temperature and
function.
9. At the end of cooking the heating
elements will be deactivated. On the
display, the
symbol flashes and the buzzer sounds.
or button to set the
. The text
will appear on the display in
or button to set the
symbols light up on the
symbol turns off, the