Table of Contents
Advertisement
4. Press the
key to confirm data set;
now, the
symbol will switch off and
the
symbol will be on solid.
When setting the pyrolytic cycle,
pay attention not to turn the function
knob. In this case, data set through
the timer is deleted and must be set
again.
During the first pyrolytic cycle,
unpleasant odours may occur due
to the normal evaporation of oily
manufacturing substances. This is
an absolutely normal phenomenon
which disappears after the first
pyrolytic cycle.
During the pyrolytic cycle the fans
produce a more intense level of
noise due to a greater rotation
speed. This is an absolutely normal
operation, intended to provide
more effective heat dispersal. At
the end of the pyrolytic cycle, the
fans will continue to operate for
long enough to avoid overheating
the walls of adjacent units and the
front of the oven.
42
Cleaning and maintenance
4.7 Extraordinary maintenance
Replacing the interior light bulb
(main oven)
Live parts
Danger of electrocution
• Unplug the appliance from the mains.
1. Remove all accessories from inside the
oven cavity.
2. Remove the rack/tray support frames.
3. Remove the bulb cover using a tool
(e.g. a screwdriver).
Take care not to scratch the
enamel of the oven cavity wall.
Advertisement
Table of Contents
