Table of Contents
Advertisement
4. Slide out and remove the light bulb.
Do not touch the halogen light
bulb directly with your fingers, use
an insulating material.
5. Replace the light bulb with one of the
same type (40W).
6. Refit the cover. Ensure the moulded part
of the glass (A) is facing the door.
7. Press the cover down as far as it will go
so that it attaches completely to the bulb
support.
Cleaning and maintenance
Replacing the interior light bulb
(auxiliary oven)
1. Unscrew bulb protector A (turn anti-
clockwise).
2. Replace bulb B with one of the same
type (25W). Use only oven bulbs
(T 300 °C).
3. Re-fit bulb protector A.
Installing and removing the oven seal
(pyrolitic oven excluded)
To remove the seal:
• Unhook the clips in the 4 corners then
pull the seal outwards.
To refit the seal:
• Hook the clips in the 4 corners onto the
seal.
Seal maintenance tips
The seal should be soft and elastic.
• To keep the seal clean, use a non-
abrasive sponge and wash with
lukewarm water.
43
Advertisement
Table of Contents
