Omron NS7 Series Setup Manual page 201

Appendix 2 Specifications
@ Operating Specifications
Item
Touch panel
(Matrix type)
@ External Interface Specifications
Item
Expansion memory
interface (See note.)
Memory card
interface
Expansion interface
Note: This interface is for NS-series PTs only. Units not specified in this manual cannot be in-
stalled.
@ Programming Device (Software for Creating Screen Data)
Item
Name
Model
A-2-3 Communications Specifications
· Serial Communications
Item
Port A
Port B
Note: The 5-V output of serial ports A and B cannot be used at the same time.
A-6
NS12-TS0@
Method: Resistive membrane
Number of switches: 1900 Number of switches: 1200
(50 horizontal ´ 38 verti- (40 horizontal ´ 30 verti-
cal) cal)
16 ´ 16 dots for each 16 ´ 16 dots for each
switch. switch.
Input: Pressure-sensitive
Service life: 1,000,000 touch operations.
NS12-TS0@
1 slot for expanding screen data capacity.
8-Mbytes/16-Mbytes expansion
1 ATA-Compact Flash interface slot.
Used to transfer and store screen data and to store history data.
For Expansion Interface Units
Used to install a Controller Link Interface Unit or Video Input Unit.
NS-Designer
NS-NSDC1-V@
Conforms to EIA RS-232C.
D-Sub female 9-pin connector
5-V output (250 mA max.) through pin 6
(See note.)
Conforms to EIA RS-232C.
D-Sub female 9-pin connector
5-V output (250 mA max.) through pin 6.
(See note.)
Specifications
NS10-TV0@
Number of switches: 768
(32 horizontal ´ 24 verti-
cal)
20 ´ 20 dots for each
switch.
Specifications
NS10-TV0@
Specifications
Specifications
NS7-SV0@
NS7-SV0@
-