Table of Contents
Advertisement
CHECKING THE GAS SETTINGS
ton (Figure 7.2) until the message OFF
appears on the LCD display (Figure 7.14).
Figure 7.14
During the operations to check maximum
and minimum pressure at the burner, check
the flow rate of gas to the meter and com-
pare its value with the gas flow rate data;
see section "Technical data M270V.2025
SM" on page 22 and "Technical data
M270V.2530 SM" on page 26.
Reclose the flue gas analysis outlets.
- 58 -
RESET
bar
Advertisement
Table of Contents
