Epson DFX-5000+ Service Manual page 41

Page Length (inches)
4. Use DIP switches 3-5 and 3-6 to set the paper type
I
5. Hold down both MICRO FEED buttons and turn on the printer.
6. If you are using forms with a label, indicate the label's position by following
these steps:
(1) Open the printer cover.
(2) Align the pointer on the ribbon mask with one ofthe label's corners.
button.
(3) Press the TOP OF FORM button.
(4) Move the pointer to the corner ofthe label diagonally opposite the first
corner.
(5) Press the TOP OF FORM button.
(6) Close the printer cover.
7. Use the printer beeps to confirm that the paper format and thickness
information has been saved properly. Ifthe printer beeps once or twice, the
information has been saved correctly in memory area 1 or 2. Ifthe printer
beeps 10 times, the information has not been saved; carefully follow steps 1
through 7 in this section again.
Table l-10. Setting the Page Length
Table l-11. Setting the Paper Type
Paper Type
DIP SW DIP SW
3-2
3-1
1-27