Epson DFX-5000+ Service Manual page 22

Product Description
6. The pitch of perforations (the ratio of the cut part to the uncut part) must be
less than 5:l.
7. Horizontal perfor,ations must have uncut parts on both edges of the paper.
Figure l-7. Paper Edge at a Horizontal Perforation
8. At the intersection of a horizontal and vertical perforation, the perforation cuts
must not cross each other. Figure 1-8 shows examples of correct perforation
intersections.
1-8
cut
-
cut
Uncut
Uncut
Figure l-6. Perforation Pitch
I
- - - - - - - -
Figure l-8. Perforation Intersections
- - tx-
Uncut
I
I
EPSON DFX-5000+ Service Manual