Epson DFX-5000+ Service Manual page 145

Removing the CR Motor
1. Remove the printhead. (See page 3-7.)
2. Remove the printer mechanism. (See Removing the Printer hfechunism, on
page 3-26.)
3. Remove the CP (PS) (M3 x 6) screw securing the timing belt holder and timing
belt.
Figure 3-54. Removing the Timing Belt Holder
4. Disconnect the CR motor cable from the white, 2-pin connector on the
connector junction board assembly and unhook the CR motor cables at the
base frame ofthe printer mechanism.
EPSON DFX-5000+ Service Manual
Disassembly and Assembly
3-49