Disassembly and Assembly
4.
Release the harness from the carriage hook and remove the CP (SP) (M3 x 6)
screw.
Connector Junction Board
Signal]
[for Fan Drive Signal and Thermistor
[for Carriage Encoder Signal)
CP[SP [M3X6]
Figure 3-7. Removing the FPC Cover and the Connectors
5.
Remove the 2 CPN (M3 x 8) screws securing the FPC cover to the bottom plate
of the printer mechanism.
EPSON DFX-5000+ Service Manual
3-8