Panasonic SC-HC30 Operating Instructions Manual page 6

Attaching the unit to a wall (Optional)
Wall mount instructions
• Before installation, turn the unit off and disconnect the AC power supply cord plug from the AC receptacle.
• Tighten screws firmly to prevent slack in each step.
1. Detach the stand from the unit.
 Unscrew the fixing screw
Keep the removed screws in a safe place.
Bottom of main unit
2. Attach the wall bracket to the back of the unit.
 Align both tabs on the wall bracket and the main unit, then slide it
in until it clicks into place.
Wall bracket (bottom view)
Tab
Rear of
main unit
3. Drive the mounting screws into the wall.
 Measure and mark the position of the mounting screw
• Use figures below for screw positions and measurements.
• Please install using both wall mounting screws.
• Use a level ruler to ensure both screws are level.
• Use a screw which is strong enough to support the weight of at least 20 kg (44 lb.).
Rear View
300 mm (11
Space required
130 mm
(5 1 / ")
8
74.8 mm
(2 / ")
15
16
77.5 mm (3
6
6
(2 pieces) at the bottom of the unit.
A
Soft blanket
or cloth
Fixing screw
2
1
C
/ ")
13
16
AUX
/ ") 85.5 mm (3 / ")
1 3
16 8
500 mm (19 / ")
11
16
700 mm (27 / ")
9
16
(continued)
 Slide the stand off the unit.
Stand
A
 Secure the wall bracket with fixing screw
[Tightening torque: 1.2 Nm (57/64 lb-ft) to 1.5 Nm (1
(2 pieces) and drive them into the wall.
Wall
163 mm (6 / ")
7
16
Mounting screw
C
Space required
(2 pieces).
B
Fixing screw
B
A length which supports the strength of
20 kg (44 lb.) or more must be kept for
each screw.
8 mm (5/16") to 9.5 mm (3/8")
4 mm
2.2 mm (3/32") to 2.8 mm (7/64")
(5/32")
2.5 mm (3/32") to 3.5 mm (9/64")
/ lb-ft)]
7
64