Product Identification Marking is located on the bottom of the unit. The holes at the back are used only by the retailers for product display purposes. Panasonic cannot be held responsible for any property damage and/or serious injury, including death resulting from improper use of these holes.
IMPORTANT Safety precautions SAFETY WARNING! INSTRUCTIONS Unit • To reduce the risk of fire, electric shock or product damage, – Do not expose this unit to rain, moisture, dripping or splashing. Read these operating instructions carefully before using – Do not place objects filled with liquids, such as vases, the unit.
Making the connections Connect the AC power supply cord only after all the other connections have been made. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE SCREWS. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence...
Overview of controls Do the procedures with the remote control. You can also use the buttons on the main unit if they are the same. Top view Standby/on switch [`], [1] Mute the sound To cancel, press the button again. Press to turn the unit from on to standby mode or vice “MUTE”...
The device connects with this system automatically after pairing is complete. The MAC address (example: 6C:5A:B5:B3:1D:0F) USB device may be shown before “SC-HC300” is shown. (not supplied) The name of the connected device is shown for a few seconds. Note: You can pair up to 8 devices with this system.
█ Disconnecting a device Media playback Press [ ] to select “BLUETOOTH”. The following marks indicate the availability of the feature. Press [PLAY MENU] repeatedly to select CD-R/RW in CD-DA format or with MP3 files. “DISCONNECT?”. USB device with MP3 files. Press [R, T] to select “OK? YES”...
Page 8
█ Note on disc Play menu • This system can play CD-R/RW with CD-DA or MP3 format content. CD USB • This system can access up to: – CD-DA: 99 tracks Press [PLAY MENU] repeatedly to select • Before playback, finalize the disc on the device it was “PLAYMODE”...
█ Selecting a preset station Radio Press [PLAY MENU] repeatedly to select “TUNE MODE”. Preparation Press [RADIO/AUX] to select “FM”. Press [R, T] to select “PRESET” and then press [OK]. Manual tuning Press [2/3] or [5/6] to select the preset station.
Play timer Clock and timers You can set the timer to come on at a certain time to wake you up. Setting the clock Preparation Set the clock. This is a 12-hour clock. Press [SETUP] repeatedly to select “TIMER ADJ”. Press [SETUP] repeatedly to select “CLOCK”.
Sound effects External music device You can play music from an external music device. Press [SOUND] repeatedly to select the sound effect. Preparation • Turn off the equalizer (if any) of the external music Press [R, T] to select the setting and then press device to prevent sound distortion.
Software update Others Occasionally, Panasonic may release updated software for this unit that may add or improve the way a feature Auto off operates. These updates are available free of charge. For more details, refer to the following website. http://panasonic.jp/support/global/cs/ This system automatically turns off when you do not use it (This site is in English only.)
® • Adjust the volume of the system. audio output to “SC-HC300” manually. Read the operating • Turn off the system, determine and correct the cause, and instructions of the device for details. then turn on again. It can be caused by straining of the speakers through excessive volume or power, and when Sound from the device is interrupted.
Page 14
█ Main unit displays “REMOTE 1” “REMOTE 2” “--:--” • The remote control and the main unit are using different • You connected the AC power supply cord for the first time or codes. Change the code of the remote control. there was a power failure recently.
Remote control code System memory reset When other Panasonic equipment responds to the remote Reset the memory when the following situations occur: control of this system, change the remote control code for • There is no response when buttons are pressed.
Specifications █ General █ USB section USB port power DC OUT 5 V 1.5 A Power supply AC 120 V, 60 Hz USB standard USB 2.0 full speed Power consumption 21 W Media file format support MP3 (*.mp3) Power consumption in standby mode (approximate) Audio support format With “BLUETOOTH STANDBY”...
– Taking apart or modifying the unit. trademarks owned by the Bluetooth SIG, Inc. and any – Removing specification indications. use of such marks by Panasonic Corporation is under license. Other trademarks and trade names are those of Restrictions of use their respective owners.
Ninety (90) days This warranty is given only to the original purchaser, or the person for whom it was purchased as a gift, of a Panasonic brand product mentioned above sold by an authorized Panasonic dealer in Canada and purchased and used in Canada, which product was not sold “as is”, and which product was delivered to you in new condition in the original packaging.