Table of Contents
Advertisement
Setting Up the Printer
Installing Options
R CAUTION:
1
• Before installing options, the machine should be turned off and unplugged
for at least thirty minutes. Components inside the machine become very
hot, and can cause a burn injury if touched.
• Before moving the machine, unplug the power cord from the outlet. If the
cord is unplugged abruptly, it could become damaged. Damaged plugs or
cords can cause an electrical or fire hazard.
• When lifting the machine, use the grips on both sides. The machine could
break or cause an injury if dropped.
You can increase the functionality of the printer by adding options. See
"Options" in the "Printer Reference" to confirm what kind of options are avail-
able.
If you intend to install options, options should be installed in the order described
below.
Important
Rating voltage of the connector for options; Max. DC24V.
Note
If you want to install SR720 (finisher), Bridge Unit Type 270 and PS420 or
PS440 are required.
If you want to install Bridge Unit Type 270 and SR720 (finisher), contact your
sales or service representative.
6
Advertisement
Table of Contents
