7
INSTALLATION AND UNINSTALLATION
This chapter shows the procedure for installing and uninstalling High Speed Data Communication Module Tool.
Considerations for installation/uninstallation
• Log on to a personal computer as a user with the administrator authority.
• Before the installation, end all running applications on the operating system.
If software is installed while other applications are running, the product may not run normally.
• Install the software after changing the setting to prevent starting the update program automatically.
The installer may not run normally if an update program for either operating system or software of other companies such as
Windows Update and Java update starts automatically.
• Disable SmartScreen.
7.1
Installation Procedure
This section shows the procedure for installing and uninstalling High Speed Data Communication Module Tool.
Operating procedure
1.
Decompress the acquired compressed file.
2.
Start the installer.
Double-click "setup.exe" in the decompressed folder.
3.
Enter or select the necessary information according to the instructions shown in the screen.
Environment after installation
High Speed Data Communication Module Configuration Tool is installed to a specified folder and registered in the start menu.
The following table shows the startup method and the maximum number of software, which can start at the same time, after
installation.
Software
High Speed Data Communication Module
Configuration Tool
7.2
Uninstallation Procedure
Uninstall High Speed Data Communication Module Configuration Tool from the control panel of Windows.
Environment after uninstallation
The installed program file, folder, and start menu are deleted after uninstallation.
If there is a new file added by a user after installation, the file/folder will not be deleted.
7 INSTALLATION AND UNINSTALLATION
62
7.1 Installation Procedure
Startup method
Select [MELSOFT] [MELSEC iQ-R High Speed Data Communication Module
Configuration Tool] from Windows Start.
Maximum
No.
5