Configuration Tool - Mitsubishi Electric MELSEC iQ-R Series User Manual

Configuration Tool

Configuration Tool configures and maintains a high speed data communication module.
For details on Configuration Tool, refer to the following:
MELSEC iQ-R High Speed Data Communication Module User's Manual (Application)
Startup method
The following are the methods for starting Configuration Tool.
Startup method
Offline startup
Online startup
Offline startup
Operating procedure
Select [MELSOFT]  [MELSEC iQ-R High Speed Data Communication Module Configuration Tool] from Windows Start.
Online startup
■Operating procedure before online startup
1.
Connect a configuration personal computer to the high speed data communication module.
Page 55 System configuration for the initial setup, maintenance, and inspection, Page 56 System configuration during
operation
2.
Configure the web browser.
Page 39 Configuring the web browser
3.
Connect with the web browser.
Page 44 Connecting with a web browser
4.
Start Configuration Tool.
Page 45 Starting Configuration Tool
4 PROCEDURES BEFORE OPERATION
38
4.1 Startup of High Speed Data Communication Module
Features
• Start Configuration Tool installed on a configuration personal computer from Windows
Start.
• Can be started without a high speed data communication module.
• Can be connected to a high speed data communication module without setting the IP
address.
• Can be connected to a high speed data communication module even if the subnet mask
differs between a configuration personal computer and high speed data communication
module.
• Start Configuration Tool directly from a high speed data communication module.
• Not necessary to install High Speed Data Communication Module Tool on a configuration
personal computer.
Reference
Page 38 Offline startup
Page 38 Online startup