Mitsubishi Electric MELSEC iQ-R Series User Manual page 46

Hide thumbs Also See for MELSEC iQ-R Series:

Table of Contents

• Enabling ClickOnce

Start Microsoft Edge, and enter "edge://flags/#edge-click-once."

Set "ClickOnce Support" to "Enabled."

Restart Microsoft Edge to apply the settings.

■Connecting with a web browser

Start Internet Explorer or Microsoft Edge, and enter the address of a high speed data communication module ("http://

192.168.3.3").

If the IP address is changed, specify the IP address set in "Network setting" of Configuration Tool. (MELSEC iQ-R High

Speed Data Communication Module User's Manual (Application))

If the high speed data communication module cannot be connected normally, issue the ping command from

the personal computer to the high speed data communication module to verify the connection.

4 PROCEDURES BEFORE OPERATION

4.1 Startup of High Speed Data Communication Module

Table of Contents