Omron E3C-LDA Series Manual page 52

1. Retro-reflective, Diffuse-reflective, and BGS-reflective Models are also available with a 5-m pre-wired cable. When ordering, add the cable
length to the end of the model number (e.g., E3ZM-CD62 5M).
2. Models with no moving parts (i.e., without a sensitivity adjustor or mode selection switch) are also available, as are models with built-in slits
(through-beam, 0.8 m) (e.g., E3ZM-CT83H 2M for no sensitivity adjustment, wire-connection selection of operating mode, and built-in slit).
3. Except for the E3ZM-CL@@H, models with 3-pin M8 connectors are available. When ordering, add "-M5" to the end of the model number (e.g.,
E3ZM-CT66-M5).
4. Through-beam Models are also available with a light emission stop function. When ordering, add "-G0" to the end of the model number (e.g.,
E3ZM-T61-G0).
Ask your OMRON representative for details on any models or specifications you require.
Accessories
Sensor I/O Connectors
Size
M12 (For -M1TJ models)
M8 (4 pins)
Note: Ask your OMRON representative about connectors with other specifications.
Mounting Brackets
Model
Appearance
(Material)
E39-L153
(SUS304)
E39-L104
(SUS304)
E39-L43
(SUS304)
E39-L142
(SUS304)
E39-L44
(SUS304)
Note: When using Through-beam Models, order one bracket for the Receiver and one for the Emitter.
* Cannot be used for Standard Connector models.
Reflector
Name
Sensing distance (typical)
Reflector
Small Reflector
Note: When using a Reflector without a rated value, use 0.7 times typical value as a guideline for the sensing distance.
* Values in parentheses indicate the minimum required distance between the Sensor and Reflector.
Let Us Know What You Need
Cable Appearance
Standard Straight
Straight
Standard
L-shaped
Quantity Remarks
1
Mounting Brackets
1
Horizontal Mounting
1
Bracket *
Horizontal Protective
1
Cover Bracket *
1 Rear Mounting Bracket
E3ZM-CR
*
3 m (100 mm) (rated value)
4 m (100 mm) (rated value)
5 m (100 mm)
2.5 m (100 mm)
3.5 m (100 mm)
1.5 m (50 mm)
Oil-resistant, Robust, Compact Photoelectric Sensor
Cable type
2 m
5 m
2 m
5 m
2 m
5m
Model
Appearance
(Material)
E39-L98
(SUS304)
E39-L150
(SUS304)
E39-L151
(SUS304)
E39-L144
(SUS304)
Model Quantity
E39-R1 1
E39-R1S 1
E39-R2 1
E39-R9 1
E39-R10 1
E39-R3 1
Model
XS5F-D421-D80-A
4-wire
XS5F-D421-G80-A
XS3F-M421-402-A
XS3F-M421-405-A
4-wire
XS3F-M422-402-A
XS3F-M422-405-A
Quantity Remarks
Metal Protective Cover
1
Bracket *
1 set
(Sensor adjuster)
Easily mounted to the alu-
minum frame rails of con-
veyors and easily adjusted.
For vertical angle adjust-
1 set
ment
Compact Protective Cover
1
Bracket *
Remarks
• Reflectors are not provided with Retro-
reflective models.
• The MSR function is enabled.
E3ZM-C
5