Omron E3C-LDA Series Manual page 47

E3Z-B
Dimensions
Note: All units are in millimeters unless otherwise indicated.
Sensors
Retroreflective Models (Pre-wired Models)
Operation indicator (orange)
Stability indicator (green)
2 lenses (7 dia.)
Receiver
Optical axis
4＊
18 4＊
Emitter
Accessories (Ordered Separately)
Reflectors
E39-R1S
Two, 3.5 dia.
E39-R1K
Material
Surface: Acrylic resin
Backside: ABS resin
Precautions
Be sure to abide by the following precautions for the safe operation of the Sensor.
For wiring precautions, refer to Precautions in Cat. No. E308-E1.
Correct Use
Design
Bottles
The Sensor may be unable to achieve stable detection depending
on the shape of bottles. Be sure to verify stable detection before
using the Sensor.
4
20
12.45
8.8
4.3
3.2
10.8 10.4
Mode selector
Sensitivity adjuster
17
2.1
31 25.4
15.5
Two, M3
4-dia., 3-core vinyl-insulated round cable
2
(Conductor cross-section: 0.2 mm ; Insulator diameter: 1.1 mm）
Standard length: 2 m
(
* 3.75 for E3Z-B 2
Coating on surface
(for E39-R1K only)
Retroreflective Models (Connector Models)
Operation indicator (orange)
Stability indicator (green)
2 lenses (7 dia.)
Receiver
Optical axis
4＊
18 4＊
Emitter
* 3.75 for E3Z-B
Mounting
Sensor Mounting
If the Sensor fails to provide stable detection due to the shape of
bottles, adjust the location and inclination of the Sensor.
Для заказов: +7(499)707-11-20,
Email: i@sp-t.ru
8-800-511-65-88(Бесплатно по РФ)
E3Z-B
20
12.45
8.8
4.3
3.2
10.8 10.4
Mode selector
Sensitivity adjuster
17
2.1
31 25.4
15.5
10.4 2-M3
( M8 connector
7
9.75