Omron E3C-LDA Series Manual page 41

Photoelectric sensors with separate digital amplifiers (laser-type amplifier units)
Hide thumbs Also See for E3C-LDA Series:
Table of Contents

Advertisement

Ordering Information
Sensor type
Shape
Limited reflective
* Using 80 x 80 mm white art paper
Rating/performance
Sensor type
Item
Model
White art paper 20 to 35 mm
Sensing
Black paper *
Light source (wave length)
Power supply voltage
Current consumption
Control output
Response time
Timer function
Ambient illuminance
Ambient temperature
Ambient humidity
Insulation resistance
Dielectric strength
Vibration resistance
Shock resistance
Protective structure
Connection method
Indicators
Weight (Packed state)
Case
Material
Lens
Accessories
A-146
Connection method
Pre-wired (2 m)
Pre-wired (2 m)
Pre-wired M8
3-pin connector (0.3 m)
Pre-wired M8
4-pin connector (0.3 m)
Pre-wired (2 m)
Pre-wired M8
3-pin connector (0.3 m)
Pre-wired M8
4-pin connector (0.3 m)
E3S-LS3@
20 to 30 mm
Red LED (660 nm)
25 mA max.
Load power supply voltage: 24 VDC max.; Load current: 100 mA max.,
Residual voltage: 2 V max.; Operating mode: Light ON
1 ms max. for operation and reset respectively
Available with E3S-LS3P(W)T models only. Time range: 0.1 to 1.0 s (adjustable)
Receiver side: Incandescent lamp: 5,000 lux max.
Operating: − 10 to 55° C (with no icing or condensation)
Operating:35% to 85% (with no condensation)
20 MΩ min. (at 500 VDC) between charged parts and the case
1,000 VAC at 50/60 Hz for 1 minute between charged parts and the case
10 to 55 Hz with a 1.5-mm double amplitude for 2 hrs each in X, Y and Z directions
2
500 m/s
, 3 times each in X, Y and Z directions
IEC60529 IP40
Pre-wired (standard length: 2 m)/Pre-wired M8 connector (standard length: 0.3 m)
Operation indicator (orange)
Pre-wired models: Approx. 80 g; Pre-wired M8 connector: Approx. 45 g
ABS
Acrylic
Instruction sheet, M3 screws,
Detection distance *
function
20 to 35 mm
Without
10 to 60 mm
Without
With
Without
20 to 35 mm
With
Without
With
Without
With
Without
10 to 60 mm
With
Without
With
Limited reflective
E3S-LS3PT
E3S-LS3@W
10 to 60 mm
15 to 50 mm
12 to 24 VDC±10%, ripple (p-p) 10% max.
Timer
Model
E3S-LS3N
E3S-LS3NW
E3S-LS3P
E3S-LS3PT
E3S-LS3P-M5J
E3S-LS3PT-M5J
E3S-LS3P-M3J
E3S-LS3PT-M3J
E3S-LS3PW
E3S-LS3PWT
E3S-LS3PW-M5J
E3S-LS3PWT-M5J
E3S-LS3PW-M3J
E3S-LS3PWT-M3J
E3S-LS3PWT
Standard Photoelectric Sensors
Red light
Output
NPN
Light ON
PNP
Light ON

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

E3c-ld11E3c-ld21E3c-ld31E3c-lr11E3c-lr12

Table of Contents