Table of Contents
Advertisement
Quick Links
Easy mounting photoelectric sensor in short M18 housing
E3FZ/E3FR
• Secure-click snap mounting for fast
installation
• High power LED for enhanced
sensing distance
• Short housing with less than
40 mm length
• Minimal optical axis deviation for easy
alignment
Easy and fast installation
The SecureClick snap mounting mechanism provides easy
installation in 2 steps and enhanced protection against vibration.
Conventional
square sensors
*SecureClick has been tested to withstand severe vibrations.
E3FZ/E3FR
Conventional
E3FZ with
cylindrical
SecureClick*
sensors
Features
Installation time can be reduced by up to 10 times compared to
conventional sensors.
>>CLICK
2
1
1
Advertisement
Table of Contents
Related Manuals for Omron E3FR
Summary of Contents for Omron E3FR
- Page 1 • Minimal optical axis deviation for easy alignment Features Easy and fast installation The SecureClick snap mounting mechanism provides easy Installation time can be reduced by up to 10 times compared to installation in 2 steps and enhanced protection against vibration. conventional sensors. >>CLICK Conventional...
-
Page 2: Ordering Information
Measured with reflector E39-R1S The reflector is sold separately. Mounting with Snap-Holder (provided with product) or M18 Nuts (provided with product) possible. Pre-wired connectors are available on request (item description see "Model Number Legend" on page 4) Standard Photoelectric Sensors... - Page 3 Telescope 3D rotation (fits to 12 mm mounting E39-EL9 mounting rod) Sensor I/O connectors Straight 4-wire XS2F-D421-D80-A Y92E-M12PUR4S2M-L XS2F-D421-G80-A Y92E-M12PUR4S5M-L L-shaped XS2F-D422-D80-A Y92E-M12PUR4A2M-L XS2F-D422-G80-A Y92E-M12PUR4A5M-L Note: For the complete list of sensor I/O connectors refer to E26E Accessories datasheet. E3FZ/E3FR...
-
Page 4: Model Number Legend
E3F@-@@@@-@-@@ 2 3 4 5 6 7 8 9 e.g., E3FZ-T81H; short housing/ through-beam/PNP output/2 m cable/without an adjustor/L-on/D-on by wire/ E3FZ-T86H-D; short housing/through-beam/PNP output/M12 connector/without an adjustor/L-on/D-on by wire/receiver E3FR-LS86; radial housing/background-suppression/PNP output/M12 connector/sensing distance of 100 mm/without an adjustor/ L-on/D-on by wire/ 1. -
Page 5: Mounting And Dismounting
(a clicking sound can be heard) Dismounting Step 1 Apply soft pressure to the sensor Remove the sensor lens in the indicated areas (e.g. with two thumbs) Step 2 Press down both snap-fits and push Remove the snap holder the snap holder forward. -
Page 6: Specifications
Instruction sheet, 2x M18 nuts, snap mounting tool (E3FZ only). The IP69k test according to DIN 40 050 part 9 is intended to simulate high pressure/steam cleaning. During the test 14-16 l/min water at 80°C is sprayed onto the sensor from different angles with 8000-10000 kPa. The sensor may not suffer any damaging effects from high pressure water in appearance and functionality. -
Page 7: Specification
Instruction sheet, 2x M18 nuts, snap mounting tool (E3FZ only). The IP69k test according to DIN 40 050 part 9 is intended to simulate high pressure/steam cleaning. During the test 14-16 l/min water at 80ºC is sprayed onto the sensor from different angles with 8000-10000 kPa. The sensor may not suffer any damaging effects from high pressure water in appearance and functionality. -
Page 8: Engineering Data (Typical)
Operating Range Diffuse reflective Models BGS Models E3F@-D@2(D@7) E3F@-LS@1H(LS@6H), left to right E3F@-LS@4H(LS@9H), left to right Sensing object: 300 x 300 white paper Sensing object: 100 x 100 white paper Sensing object: 100 x 100 white paper -100 -120 -140... - Page 9 Diffuse reflective Models BGS Models E3F@-D@2(D@7) E3F@-LS@1H(LS@6H) E3F@-LS@4H(LS@9H) Sensing object: White paper Distance (mm) Distance (mm) Length d of sensing object (mm) Sensing Distance vs. Sensing Object Material Inclination Characteristics (Vertical) BGS Models BGS Models E3F@-LS@1H(LS@6H) E3F@-LS@4H(LS@9H) E3F@-LS@1H(LS@6H) Upwards and...
-
Page 10: Output Circuit Diagram
E3F@-R8 pink wire Light Interrupted Operation indicator E3F@-D8 (Pin(2)) to (yellow) the brown Output transistor (Pin(1)) or Through-beam Receivers, retroreflective models, open the pink Operate Load diffuse reflective models (e.g., relay) 10 to 30 VDC Reset Brown wire (Pin(2). (Between brown... - Page 11 M12 4-wire Connectors M12 Connector Pin Arrangement Pin No. Wire color Brown White Blue Black XS2F-D421-D80-A XS2F-D422-D80-A XS2F-D421-G80-A XS2F-D422-G80-A Classification Wire color Connector pin No. Application Brown Power supply (+V) White Operation selection Blue Power supply (0 V) Black Output E3FZ/E3FR...
- Page 12 Dimensions Note: All units are in millimeters unless otherwise stated. E3FZ-Series Pre-wired models Connector models E3FZ-T@ Power indicator (green) Power indicator (green) Emitter M18x1 6g M18x1 6g Optical Axis 16.25 M12x1 6g 16.25 5.20 30.25 9.30 30.35 E3FZ-T@ Stability indicator (green)
- Page 13 E3FR Series Pre-wired models Connector models E3FR-T@1H 2M Power indicator (green) 30.35 25.75 25.75 18.25 18.25 16.25 10.75 10.75 Optical axis Optical axis Emitter Stability indicator (green) M18x1 6g M18x1 6g 30.35 Operation indicator (yellow) M12x1 6g 16.25 4 dia...
- Page 14 ABS base, acrylic surface E38-R49 34.5 32.8 12.6 Material: ABS base, ~ 2-3 acrylic surface E39-EL8 Material: stainless steel E39-EL9 (can be attached to dia 12 mm mounting rod) Material: stainless steel Snap mount tool 15.5 Material: Standard Photoelectric Sensors...
-
Page 15: Safety Precautions
This Sensor is equipped with load short-circuit protection, but be Environements with Cleaners and Disinfectants sure to not short circuit the load. Be sure to not use an output cur- (e.g., Food Processing Lines) rent flow that exceeds the rated current. If a load short circuit oc-... - Page 16 This is not intended to be an exhaustive list OMRON shall not be responsible for the user’s programming of a pro- of all possible uses of the products, nor is it intended to imply that the grammable product, or any consequence thereof.