Omron E3C-LDA Series Manual page 5

Built-in Power Supply Photoelectric Sensor
E3JM
Model Contribute to Overall Cost
Reduction
E3JM Terminal Block Models
• Easy to wire and adjust.
Be sure to read Safety Precautions on
page 6.
Ordering Information
Sensors
(Refer to Dimensions on page 8.)
Sensing Connection
Appearance
method method
Through-
beam
(Emitter +
Receiver) *
Retro-
reflective Terminal
with MSR block
function
E39-R1 (provided)
Diffuse-
reflective
*Through-beam Sensors are sold in sets that include both the Emitter and Receiver. An order for the Emitter or Receiver alone cannot be accepted.
Note: Tightening nuts, washers, and rubber bushings are not provided with UL-listed models.
Accessories (Order Separately)
Slit
(A Slit is not provided with the Sensor for through-beam. Order a Slit separately if required.)
Slit width Sensing distance
1 mm × 20 mm E3JM-10@4(T)-NN
Reflectors
(A Reflector is required for each Retro-reflective Sensor.)
The E39-R1 Reflector is provided with the Sensor. Order other Reflectors separately if required.
Name
Reflectors E3JM-R4@4(T)
Note: Refer to Reflectors on E39-L/E39-S/E39-R on your OMRON website for details.
Mounting Bracket
Some Mounting Brackets are provided with the Sensor. Order other Mounting Brackets separately if required.
Operation
Sensing distance
mode
10 m
Light-ON
Dark-ON
4 m
(switch
selectable)
700 mm
Minimum detectable
object
(reference value)
1.2 m 1-mm dia.
Sensing distance
4 m
Для заказов: +7(499)707-11-20,
Email: i@sp-t.ru
8-800-511-65-88(Бесплатно по РФ)
For the most recent information on models that have been certified for
safety standards, refer to your OMRON website.
Output
Conduit socket
Functions
configuration
thread size:
PF1/2
--- E3JM-10M4-NN
Relay
E3JM-10M4T-NN
Timer
--- E3JM-10S4-NN
DC SSR
E3JM-10S4T-NN
Timer
--- E3JM-R4M4
Relay
E3JM-R4M4T
Timer
--- E3JM-R4S4
DC SSR
E3JM-R4S4T
Timer
--- E3JM-DS70M4
Relay
E3JM-DS70M4T E3JM-DS70M4T-G E3JM-DS70M4T-US
Timer
--- E3JM-DS70S4
DC SSR
E3JM-DS70S4T E3JM-DS70S4T-G E3JM-DS70S4T-US
Timer
Model Quantity
1 Slit each for the
E39-S39 Emitter and Re-
ceiver (2 Slits total)
(Refer to Dimensions on E39-L/E39-S/E39-R.)
Model Quantity
E39-R1 1
CSM_E3JM_DS_E_12_3
Red light Infrared light
Model
Conduit socket
Conduit socket
thread size:
thread size:
1/2-14NPT
PG13.5
UL-listed models
E3JM-10M4-G-NN E3JM-10M4-NN-US
E3JM-10M4T-G-NN E3JM-10M4T-NN-US
E3JM-10S4-G-NN E3JM-10S4-NN-US
E3JM-10S4T-G-NN E3JM-10S4T-NN-US
E3JM-R4M4-G E3JM-R4M4-US
E3JM-R4M4T-G E3JM-R4M4T-US
E3JM-R4S4-G E3JM-R4S4-US
E3JM-R4S4T-G E3JM-R4S4T-US
E3JM-DS70M4-G E3JM-DS70M4-US
E3JM-DS70S4-G E3JM-DS70S4-US
(Refer to Dimensions on page 8.)
Remarks
(Seal-type long slit)
Can be used with the
E3JM-10@4(T)-NN,
E3JM-10@4(T)-G-NN and
E3JM-10@4(T)-NN-US Models.
Remarks
Provided with the E3JM-R4@4(T),
E3JM-R4@4(T)-G and E3JM-R4@4(T)-US
Models.
(Refer to E39-L/E39-S/E39-R)
1