Using Connectors And Peripheral Interfaces - Fujitsu Point 1600 User Manual

Here are some suggestions for conserving battery power:
• If you will not be using the pen tablet for a few minutes, put the pen tablet in
Suspend mode (see "Suspending the System" on page 2-6).
• If you will not be using the pen tablet for an extended period of time, such as at the
end of your work day, shut down the system.
• Select the low brightness setting for the screen by tapping the Brightness Hotpad
(see "Using Hotpads" on page 2-10).

Using Connectors and Peripheral Interfaces

Connectors and peripheral interfaces on the Point 1600 pen tablet allow you to connect
a variety of equipment to the pen tablet, such as a microphone, headphones, keyboard,
or printer. You can also connect your pen tablet to one of several cradles, which allow
you to connect to stationary peripherals easily.
For details on using cradles and other connectivity peripherals, refer to the
Connectivity Peripherals User Guide or contact your local help desk.
The location of peripheral connectors on the pen tablet are shown in Figure 2-3, Figure
2-4, and Figure 2-5.
Modem Jack
(modem is optional)
2-14 Using the Point 1600 Pen Tablet
PC Card Slot Eject Button
PC Card Door
Figure 2-3 Point 1600 Pen Tablet Connectors - Top
Reset Button
USB Port
2
IrDA Port