Status Leds - Fujitsu Point 1600 User Manual

Status LEDs

The status LEDs indicate various system conditions including power state, hard disk
drive use, and battery charge level. Figure 1-3 shows the status LEDs on the front of
the Point 1600 pen tablet.
Table 1-1 describes conditions indicated by each status LED. For details on power
states indicated by the Power LED, see "System Power States" on page 2-1. For more
information about battery use and maintenance, see "Charging the Battery Pack
(While Installed in the Pen Tablet)" on page 2-11 and "Low Battery Pack Conditions"
on page 2-3.
1-4 Getting Started
MIC
Figure 1-3 Status LEDs
Microphone
Power LED
HDD Access LED
Charge LED
Low-Battery LED
1