Starting Or Resuming The System - Fujitsu Point 1600 User Manual

Starting or Resuming the System

To start or resume the system,
1. Press the Suspend/Resume button once.
If system operation was suspended in the previous session, system operation will
resume. If the system was shut down in the previous session, the system will start
and the operating system will load.
2. Wait for the system to start or resume.
It may take several seconds for the system to start or resume after pressing the
Suspend/Resume button. (The display screen turns on before the pen becomes
active.) Do not press the Suspend/Resume button repeatedly, more firmly, or
hold it down continuously. Doing so will interrupt the resume or system boot
procedure.
You can use the pen tablet as soon as system operation resumes or the operating
system has finished loading.
Starting or Resuming the System
2
2-5