Suspend/Resume Button Configuration - Fujitsu Point 1600 User Manual

Suspend/Resume Button Configuration

The Suspend/Resume button on the pen tablet can be configured using one of the
following three settings:
• Normal
In the Normal setting, the system suspends or resumes operation when you press
the Suspend/Resume button. If the system has been shut down, pressing the
Suspend/Resume button starts the system.
• Resume Only
In the Resume Only setting, the Suspend/Resume button can only be used to
resume system operation or start the system if it has been shut down.
• Power On/Off
In the Power On/Off setting, the system turns on or off when you press the
Suspend/Resume button. (Note that in this setting, pressing the
Suspend/Resume button will resume the system if it has been suspended using a
software command.)
If your system is configured to use the Power On/Off setting,
do not attempt to suspend system operation by pressing the
Suspend/Resume button. Doing so will cause data in open
files and applications to be lost. Ask your local help desk or
reseller for assistance if you are not sure how your system is
configured.
2-4 Using the Point 1600 Pen Tablet
Caution
2