Connectors And Peripheral Interfaces - Fujitsu Stylistic Manual

CONNECTORS AND PERIPHERAL INTERFACES

Connectors and peripheral interfaces on the
Stylistic ST4110 Fujitsu Tablet PC allow
connection of a variety of devices. Specific
locations are illustrated in Figures 1-2 through
1-5.
Connect/
Tablet PC
Peripheral
DC input
connect
USB Port
PCMCIA
Card Slot
Microphone
jack
Headphone
jack
IrDA/FIR port
Modem
Tablet Dock
port
Icon
Connect an external power source such as the AC adapter
or auto/airline adapter.
Connect Universal Serial Bus 1.1 compliant devices to the
Tablet PC.
Install a Type I or Type II PC Card.
Connect an external microphone. The internal microphone
is disabled when you plug in an external microphone.
Connect stereo headphones or powered external speakers.
The internal speaker is disabled when you plug in external
headphones or powered speakers.
An infrared transceiver built into the Tablet PC allows you to
communicate with other devices that are compliant with the
IrDA Standard Rev. 1.1. Effective range for infrared
communication is about 3 feet, and within 15 degrees off
center. A clear line-of-sight path must exist between the
IrDA port on the Tablet PC and the IrDA transceiver on the
other device.
Connect a telephone line to the optional internal modem
using a standard RJ-11 telephone plug.
Connect the Stylistic ST4110 Fujitsu Tablet Dock or other
approved docking device. Refer to documentation
accompanying the docking device for more information.
G e t t i n g S t a r t e d
Table 1-6 provides a description of each
peripheral connector on the Stylistic ST4110
Fujitsu Tablet PC. Each of the illustrated icons
is either molded into or printed on the Tablet
PC case.
Purpose
15