Connectors And Peripheral Interfaces - Fujitsu ST6012 - Stylistic Tablet PC User Manual

Connectors and Peripheral Interfaces

Connectors and peripheral interfaces on the Stylistic ST6000 Series Tablet PC allow the connection of a
variety of devices. Specific locations are illustrated in Figures 1-2 through 1-5.
Table 6 provides a description of each peripheral connector on the Stylistic ST6000 Series Tablet PC. Each
of the illustrated icons is either molded into or printed on the Tablet PC chassis.
Connector/Peripheral
DC input connector
USB Port
PCMCIA Card slot
SD Card/Memory Stick
slot
Microphone jack
Headphone jack
IrDA/FIR port
Tablet PC Icon
Connect an external power source such as the AC adapter or auto/airline
adapter.
Connect Universal Serial Bus 2.0 compliant devices to the Tablet PC.
Insert a Type I or Type II PC Card.
Insert a Secure Digital (SD) Card or a Memory Stick.
Connect an external microphone. The internal microphone is disabled when
you plug in an external microphone.
Connect stereo headphones or powered external speakers. The internal
speaker is disabled when you plug in external headphones or powered
speakers.
An infrared transceiver built into the Tablet PC allows you to communicate
with other devices that are compliant with the IrDA Standard Rev. 1.1.
Effective range for infrared communication is about 3 feet, and within 15
degrees off center. A clear line-of-sight path must exist between the IrDA
port on the Tablet PC and the IrDA transceiver on the other device.
41 - Connectors and Peripheral Interfaces
Purpose