Fujitsu Point 1600 User Manual page 34

2. Clean the display screen surface by wiping the screen surface gently using a soft
cotton cloth dampened with denatured alcohol. Ensure that all film has been
removed from the screen before applying a new screen protector.
The Point 1600 pen tablet is not waterproof. Do not pour
liquids on the system or wash it with a heavily soaked cloth.
3. Remove the protective plastic cover from the adhesive side of the screen protector
first.
4. Apply the screen protector to the display screen surface. When doing so, orient
the screen protector with the adhesive side of the screen protector facing the
display screen and the notched corner of the screen protector toward the lower
left corner of the display screen.
5. Remove the protective plastic cover from the face of the screen protector. (The
screen protector is shipped with protective plastic covers on both sides.)
6. Apply pressure to the screen protector along the edges. The adhesive sets
completely within 48 hours. To ensure a good seal between the screen protector
and the display, do not lift the screen protector from the display once it has been
applied.
7. Wipe the screen protector with a soft dry cloth to remove any low-tack adhesive;
this will help to prevent the pen tip from squeaking.
The screen protector is now installed.
3-2 Care, Maintenance, and Troubleshooting
Caution