Table of Contents
Advertisement
Item
[SHOOTING MODE]
[CABLE CONNECTION]
[IN/OUT SELECT]
Item
[CALL TALLY]
[TALLY GUARD]
[HD-SDI1 OUT]
[HD-SDI1 OUTPUT FORMAT]
[HD-SDI1 OUTPUT ITEM]
[HD-SDI1 CHAR]
[HD-SDI1 CHAR SIZE]
[HD-SDI1 3G-SDI]
[HD-SDI2 OUT]
[HD-SDI2 OUTPUT FORMAT]
[HD-SDI2 OUTPUT ITEM]
[HD-SDI2 CHAR]
[HD-SDI2 CHAR SIZE]
[HD-SDI2 3G-SDI]
[HD-SDI2 POWER]
[AUX I/O]
[VF OUT]
Chapter 4 Menu Operations — Menu list
Sets the shooting mode.
[NORMAL], [HIGH SENS]
f Factory setting: [NORMAL]
Set the connection method used between the camera and CCU.
[HYBRID], [FIBER]
f Factory setting: [HYBRID]
Sets whether the rear tally lamp is to be lit up when called.
[OFF]: Turned off.
[R]: Red tally lights up.
[T]: Up tally lights up.
[R&T]: Red tally and up tally light up.
f Factory setting: [OFF]
Enables/disables automatic white balance, automatic black balance, and automatic setup when the tally
lamp is lit.
[OFF], [ON]
f Factory setting: [OFF]
Configures the video output from the <HD SDI1> terminal.
[CAM]: Outputs camera images.
[HD PROMPT]: Outputs HD prompter video images.
f Factory setting: [CAM]
Sets the signal format of the video output from the <HD SDI1> terminal.
[1080i], [1080P], [720P]
f Factory setting: [1080i]
Selects details of the characters superimposed on images output from the <HD SDI1> terminal.
[MENU ONLY]: Displays only on the menu.
[STATUS]: Displays all characters that are the same as in the viewfinder display.
f Factory setting: [MENU ONLY]
Sets whether to superimpose characters on images output from the <HD SDI1> terminal.
This cannot be set when the output format is [720P].
[OFF], [ON]
f Factory setting: [OFF]
Sets the size of the characters superimposed on images output from the <HD SDI1> terminal.
[LARGE], [SMALL]
f Factory setting: [SMALL]
Sets the output format when the video output from the <HD SDI1> terminal is in 3G format.
[LEVEL-A], [LEVEL-B]
f Factory setting: [LEVEL-A]
Configures the video output from the <HD SDI2> terminal.
[CAM]: Outputs camera images.
[VF]: Outputs viewfinder images.
[RET]: Outputs return images.
[RET1], [RET2], [RET3], [RET4]: Outputs fixed return images.
f Factory setting: [VF]
Sets the signal format of the video output from the <HD SDI2> terminal.
[1080i], [1080P], [720P]
f Factory setting: [1080i]
Selects details of the characters superimposed on images output from the <HD SDI2> terminal.
[MENU ONLY]: Displays only on the menu.
[STATUS]: Displays all characters that are the same as in the viewfinder display.
f Factory setting: [MENU ONLY]
Sets whether to superimpose characters on images output from the <HD SDI2> terminal.
This cannot be set when the output format is [720P].
[OFF], [ON]
f Factory setting: [OFF]
Selects the size of the characters superimposed on images output from the <HD SDI2> terminal.
[LARGE], [SMALL]
f Factory setting: [SMALL]
Sets the output format when the video output from the <HD SDI2> terminal is in 3G format.
[LEVEL-A], [LEVEL-B]
f Factory setting: [LEVEL-A]
Enables/disables the power supply of the <HD SDI2> terminal.
[ACTIVE], [SAVE]
f Factory setting: [ACTIVE]
Configures the video output from the <AUX> terminal.
[PMT2 OUT], [HD TRUNK]
f Factory setting: [PMT2 OUT]
Configures the video output from the <VF> terminal.
[Y/C], [R], [G], [B], [NAM]
f Factory setting: [ENC]
– 66 –
Description of settings
Description of settings
Advertisement
Table of Contents
