Panasonic AK-HC5000G Operating Instructions Manual page 20

@ NOTE
t Do not remove or insert the card while this lamp is lit. Doing so may damage the SD memory card.
11 SD memory card slot
This is the insertion slot for the SD memory card (optional).
An SD memory card is used for saving/loading the setting menus of the camera, loading CAC files, updating the software, etc.
For details, refer to "Data" (page 36).
12 <OUTPUT> switch
Switches video output (<CAM>, <BARS>, <TEST>).
This switch cannot be used when the CCU or ROP is connected to the camera.
13 <WHITE BAL> switch
Selects the white balance memory. Data can be recorded to <A> or <B>.
<PRST>: The white balance configured in [MAIN MENU] → [PAINT] → [COLOR TEMP SETTING] is set.
This switch cannot be used when the CCU or ROP is connected to the camera.
14 Shoulder strap fittings
Used to attach the shoulder strap.
15 <USER 4> button
A user-selected function can be assigned to this button. Pressing the button performs the assigned function.
16 <DC OUT 12V 2.5A> terminal
This terminal is a DC 12 V output terminal. It provides a maximum current of 2.5 A.
If the current exceeds the rating, the current will be cut off intermittently.
@ NOTE
t Immediately disconnect external equipment if the power supply to external equipment is cut off intermittently. Failure to do so may lead to a
malfunction.
t When connecting external equipment, first fully check the polarities and current consumption. Failure to do so may lead to a malfunction.
17 Power indicator lamp
Lights up in green when power is supplied to the camera.
ON (green): The camera power is on
ON (red): The camera power is off while the camera is connected to the CCU which is turned on
OFF: The camera power is off with the CCU not connected, or the camera is connected to the CCU which is turned off
18 <POWER> switch
Selects the camera power input, or turns off the power.
<CCU>: When the camera is connected to the CCU, this switch turns on the power with the power supplied from the CCU.
<EXT>: When an external DC power supply is connected to the camera, this switch turns on the power with the power supplied from the external
power supply.
Center position: Turns off the power.
Chapter 2 Description of Parts — Left side
– 20 –