Table of Contents
Advertisement
[RGB GAIN CONTROL SETTING]
Item
[RGB GAIN ABS DISP SWITCH]
[G GAIN REL CONTROL SWITCH]
[RGB GAIN PRESET]
[R GAIN]
[G GAIN]
[B GAIN]
[RGB GAIN ACH/BCH]
—
[R GAIN ACH]
[G GAIN ACH]
[B GAIN ACH]
[GAIN OFFSET ACH]
[R GAIN BCH]
[G GAIN BCH]
[B GAIN BCH]
[GAIN OFFSET BCH]
[WHITE SHADING]
Item
[CORRECT]
[H SAW R]
[H SAW G]
[H SAW B]
[H PARA R]
[H PARA G]
[H PARA B]
[V SAW R]
Chapter 4 Menu Operations — Menu list
Sets whether to show the absolute value display for Ach/Bch inRGB gain.
[OFF], [ON]
f Factory setting: [OFF]
Enables/disables the relative value control of Gch gain.
[OFF], [ON]
f Factory setting: [OFF]
Sets the preset value of Rch gain.
[−1000]...[+1000]
f Factory setting: [0]
Sets the preset value of Gch gain.
[−1000]...[+1000]
f Factory setting: [0]
Sets the preset value of Bch gain.
[−1000]...[+1000]
f Factory setting: [0]
When the camera is connected to the CCU, only [R GAIN ACH]/[G GAIN ACH]/[B GAIN ACH]/[GAIN
OFFSET ACH] can be set.
Sets the correction level of red to the gain.
[−1000]...[+1000]
f Factory setting: [0]
Sets the correction level of green to the gain.
[−1000]...[+1000]
f Factory setting: [0]
Sets the correction level of blue to the gain.
[−1000]...[+1000]
f Factory setting: [0]
Sets whether to maintain the Rch, Gch, and Bch gain levels when adjusting the automatic white balance.
[ON]: Maintains the values set in [R GAIN ACH], [G GAIN ACH], and [B GAIN ACH].
[OFF]: Sets [R GAIN ACH], [G GAIN ACH], and [B GAIN ACH] to [0].
f Factory setting: [OFF]
Sets the correction level of red to the gain.
[−1000]...[+1000]
f Factory setting: [0]
Sets the correction level of green to the gain.
[−1000]...[+1000]
f Factory setting: [0]
Sets the correction level of blue to the gain.
[−1000]...[+1000]
f Factory setting: [0]
Sets whether to maintain the Rch, Gch, and Bch gain levels when adjusting the automatic white balance.
[ON]: Maintains the values set in [R GAIN BCH], [G GAIN BCH], and [B GAIN BCH].
[OFF]: Sets [R GAIN BCH], [G GAIN BCH], and [B GAIN BCH] to [0].
f Factory setting: [OFF]
Enables/disables the white shading (saw-toothed waveform or parabolic waveform) correction.
[OFF], [ON]
f Factory setting: [ON]
Adjusts the white shading gain for Rch horizontally using a saw-toothed waveform.
[−100]...[+100]
f Factory setting: [0]
Adjusts the white shading gain for Gch horizontally using a saw-toothed waveform.
[−100]...[+100]
f Factory setting: [0]
Adjusts the white shading gain for Bch horizontally using a saw-toothed waveform.
[−100]...[+100]
f Factory setting: [0]
Adjusts the white shading gain for Rch horizontally using a parabolic waveform.
[−100]...[+100]
f Factory setting: [0]
Adjusts the white shading gain for Gch horizontally using a parabolic waveform.
[−100]...[+100]
f Factory setting: [0]
Adjusts the white shading gain for Bch horizontally using a parabolic waveform.
[−100]...[+100]
f Factory setting: [0]
Adjusts the white shading gain for Rch vertically using a saw-toothed waveform.
[−100]...[+100]
f Factory setting: [0]
– 58 –
Description of settings
Description of settings
Advertisement
Table of Contents
