Table of Contents
Advertisement
[GAIN SETTING]
Item
[LOW GAIN]
[OFFSET LOW GAIN]
[MID GAIN]
[OFFSET MID GAIN]
[HIGH GAIN]
[OFFSET HIGH GAIN]
[IRIS]
Item
[AUTO IRIS]
[WINDOW SELECT]
[IRIS LEVEL]
[PEAK RATIO]
[IRIS RANGE]
[IRIS SPEED]
[IRIS GAIN]
[LENS EXT COMP SW]
[EXTENDER1]
[LENS EXT COMP LEVEL]
[EXTENDER2]
Chapter 4 Menu Operations — Menu list
Sets the amount of gain increase when <L> is selected for the <GAIN> switch.
[−6dB]...[36dB]
When [MAIN MENU] → [SYSTEM MODE] → [SHOOTING MODE] → [NORMAL] is set:
[−3dB]...[36dB]
f Factory setting: [0dB]
Sets the offset from [LOW GAIN].
[−2.9dB]...[+2.9dB] (0.1 dB step)
f Factory setting: [0.0dB]
Sets the amount of gain increase when <M> is selected for the <GAIN> switch.
[−6dB]...[36dB]
When [MAIN MENU] → [SYSTEM MODE] → [SHOOTING MODE] → [NORMAL] is set:
[−3dB]...[36dB]
f Factory setting: [9dB]
Sets the offset from [MID GAIN].
[−2.9dB]...[+2.9dB] (0.1 dB step)
f Factory setting: [0.0dB]
Sets the amount of gain increase when <H> is selected for the <GAIN> switch.
[−6dB]...[36dB]
When [MAIN MENU] → [SYSTEM MODE] → [SHOOTING MODE] → [NORMAL] is set:
[−3dB]...[36dB]
f Factory setting: [18dB]
Sets the offset from [HIGH GAIN].
[−2.9dB]...[+2.9dB] (0.1 dB step)
f Factory setting: [0.0dB]
Enables/disables the auto iris mode.
[OFF], [ON]
f Factory setting: [ON] (when the camera is used standalone), [OFF] (others)
Sets the photometric range.
[1]...[4]
The image of window will be as follows.
[1]
f Factory setting: [1]
Adjusts the target value (brightness) of the auto iris.
[0]...[100]
f Factory setting: [50]
Sets the ratio of the peak value and average value of auto iris photometry.
[0]...[100]
f Factory setting: [50]
Sets the fine adjustment range of the auto iris level using the iris adjustment joystick.
[NORMAL], [(3/4)], [(2/4)], [(1/4)]
f Factory setting: [NORMAL]
Sets the auto iris speed.
[1]...[25]
f Factory setting: [15]
Switches whether to adjust auto iris photometry speed adjustment with the iris gain volume of the lens or
from the menu. Normally, set this to [LENS] and make adjustments with the iris volume of the lens.
[LENS], [CAM]
f Factory setting: [LENS]
Sets the ALC compensation when the lens extender is enabled.
[OFF], [ON]
f Factory setting: [OFF]
Sets the magnification of lens extender 1.
[NONE], [0.1]...[9.9]
f Factory setting: [2.0]
Sets the iris compensation level when lens extender 1 is enabled.
[−100]...[+100]
f Factory setting: [0]
Sets the magnification of lens extender 2.
[NONE], [0.1]...[9.9]
f Factory setting: [NONE]
– 46 –
Description of settings
Description of settings
[2]
[3]
[4]
Advertisement
Table of Contents
