Table of Contents
Advertisement
Item
[OUTPUT LEVEL]
[CANCEL LEVEL]
[STBY INCOM ON/OFF]
[CRANE INTERCOM]
Item
[CRANE INCOM
[INPUT LEVEL]
SETTING]
[OUTPUT LEVEL]
[SIDE TONE]
[ENG/PROD]
[CRANE TO CCU]
[CRANE INCOM
[PGM1 MIX]
OUTPUT SETTING]
[PGM2 MIX]
[INCOM1 MIX]
[INCOM2 MIX]
([CLEAR COM MIX])
[CLEAR COM]
This item is not displayed when intercom 2 is connected.
Item
[CLEAR COM SETTING] [INPUT LEVEL]
[CANCEL LEVEL]
[SIDE TONE]
[CLEAR COM TO CCU]
[CLEAR COM OUTPUT
[PGM1 MIX]
SETTING]
[PGM2 MIX]
[INCOM1 MIX]
[CRANE INCOM MIX]
Chapter 4 Menu Operations — Menu list
Sets the output signal level of the stand-by intercom.
[−36dB]...[+12dB]
f Factory setting: [0dB]
Sets the input/output cancel signal level of the stand-by intercom.
[−20.0dB]...[+20.0dB] (0.5 dB step)
f Factory setting: [0.0dB]
Enables/disables the stand-by intercom.
[OFF], [ON]
f Factory setting: [ON]
Sets the input volume of the crane intercom (connected to the <EXT I/O> terminal).
[−36dB]...[+12dB]
f Factory setting: [0dB]
Sets the output volume of the crane intercom (connected to the <EXT I/O> terminal).
[−36dB]...[+12dB]
f Factory setting: [0dB]
Sets the side tone volume of the crane intercom (connected to the <EXT I/O> terminal).
[OFF], [−36dB]...[0dB] (3 dB step)
f Factory setting: [−6dB]
Sets the line input of the crane intercom audio.
[ENG], [PROD], [BOTH]
f Factory setting: [ENG]
Sets whether to output the crane intercom audio to the CCU.
[OFF], [ON]
f Factory setting: [OFF]
Sets whether to mix the PGM1 signal with the crane intercom output.
[OFF], [ON]
f Factory setting: [ON]
Sets whether to mix the PGM2 signal with the crane intercom output.
[OFF], [ON]
f Factory setting: [ON]
Sets whether to mix the intercom 1 signal with the crane intercom output.
[OFF], [ON]
f Factory setting: [OFF]
Sets whether to mix the intercom 2 signal (CLEAR COM signal for Clear-Com option) with the crane
intercom output.
[OFF], [ON]
f Factory setting: [OFF]
Sets the input volume of Clear-Com.
[−36dB]...[+12dB]
f Factory setting: [0dB]
Sets the input/output cancel signal level of Clear-Com.
[−20.0dB]...[+20.0dB] (0.5 dB step)
f Factory setting: [0.0dB]
Sets the side tone volume of Clear-Com.
[OFF], [−36dB]...[0dB] (3 dB step)
f Factory setting: [−6dB]
Sets whether to output the Clear-Com audio to the CCU.
[OFF], [ON]
f Factory setting: [ON]
Sets whether to mix the PGM1 signal with Clear-Com output.
[OFF], [ON]
f Factory setting: [ON]
Sets whether to mix the PGM2 signal with Clear-Com output.
[OFF], [ON]
f Factory setting: [ON]
Sets whether to mix the INCOM1 signal with Clear-Com output.
[OFF], [ON]
f Factory setting: [OFF]
Sets whether to mix the CRANE INCOM signal with Clear-Com output.
[OFF], [ON]
f Factory setting: [OFF]
– 53 –
Description of settings
Description of settings
Description of settings
Advertisement
Table of Contents
