Product Specific Applications For All Product Applications Worker weight capacity range (including all clothing, tools, and equipment) May be used in Work Positioning is OSHA 130-420 lbs. ANSI 130-310 lbs. applications. Work Positioning systems allow a worker to be supported while in Anchorage point must be able to hold ...
When making connections with the device, Guardian holds global product liability cover eliminate all possibility of roll-out. Roll-out occurs for your safety. However, Guardian will NOT be when interference between a connector and the responsible for: attachment point causes the connector gate to Users who are out of the scope of any ...
Installation and Use Step 1 Ensure all PFAS equipment is selected and WARNING! This device is for a single deemed compatible by a Competent Person. user only. Do not use this device for ‘Work Positioning, ’ unless it is of such a length or can be adjusted to such a length that a Step 2 ...
Safety Information Harnesses and connectors selected must be compliant with manufacturer’s instructions, and WARNING! Failure to understand and must be of compatible size and configuration. comply with safety regulations may result Snap hooks, carabiners, and other connectors in serious injury or death. Regulations must be selected and applied in a compatible included herein are not all-inclusive, are fashion.
Labels ADJUSTABLE ROPE Part #: POSITIONING LANYARD Serial Number: D.O.M: • Read and understand manufacturer’s instruc- Capacity: ANSI 130-310 lbs. tion manual supplied at time of shipment. OSHA 130-420 lbs. •Only make compatible connections. Materials: Aluminum, steel, •This device is for work positioning only. stainless steel, polyamide (nylon).
Page 8
pre-use inspections, and will depend on conditions of use and maintenance. Guardian recommends any textile components or products are replaced after a maximum of five years of use. Devices used in arduous environments e.g.
Inspection Pre-use/Thorough Inspection: Device A pre-use inspection must be conducted before Check the user instruction markings/ each use, but need not be recorded. If the labeling are clear and legible. Main equipment is stored, used and maintained in the body must be intact and shows no signs correct conditions as described in this manual, of deficiencies such as those listed...
Inspection Log Serial No: Date of first issue: Model #: User: Date: Results/Condition: Inspected by: Next Inspection Date:...
Page 12
1-800-466-6385 customer.service@puresafetygroup.com Guardian Fall Protection 607 East Sam Houston Parkway South, Suite 800 guardianfall.com Pasadena, TX 77503 USA...