(Module D) of the Regulation under surveillance of Notified Body: SGS Fimco Oy (0598) Takomotie 8, Fl-00380, HELSINKI, Finland Signed for and on behalf of: Checkmate Lifting & Safety Ltd t/a Guardian Fall Name: Peter Upcott Place: Sheerness, Kent...
(Module D) of the Regulation under surveillance of Notified Body: SGS Fimco Oy (0598) Takomotie 8, Fl-00380, HELSINKI, Finland Signed for and on behalf of: Checkmate Lifting & Safety Ltd t/a Guardian Fall Name: Peter Upcott Place: Sheerness, Kent...
Worker Classifications Risk Statement CAUTION! Understand following The lanyard is designed to protect against falls definitions of those who will work near or from height by reducing exposure to a fall hazard who may be exposed to a fall. during restraint/work positioning applications, when used in accordance with this manual.
Product Specific Applications Weight Capacities For All Applications WARNING! equipment - User weight range (including all clothing, unintended applications result tools, and equipment) is 59-100 kg. in serious injury or death. Maximum 1 attachment per connection point. For All Product Applications Restraint: Restraint Lanyard may be used in Restraint applications.
Limitations Do not use Restraint Lanyard if the potential exists to fall over an edge. Fully extended length of Restraint Lanyard must prevent access to any/all fall hazards. Do not extend the maximum length of the lanyard beyond the length stated on the label. Compatibility When making...
G-LRT Twin-Leg Restraint Lanyard with (3x) Aluminium Karabiners 1400265 G-LRT Twin-Leg Restraint Lanyard with (1x) Aluminium Karabiner & (2x) Aluminium Scaffold Hooks The lanyard is recommended for use with the following products. Please contact Guardian with any questions regarding product compatibility. • Harness compliant with EN361 •...
If a Restraint Lanyard fails inspection in any way, Inspect Guardian Restraint Lanyards and all immediately remove it from service, and contact PFAS equipment to be used in combination with Guardian to inquire about its return or repair. Restraint Lanyards. Step 2 ...
Inspection At least every 12 months, a Competent Person other than the user must inspect Restraint Lan- yard. Competent Person inspections MUST be Prior to EACH use, inspect Restraint Lanyard for recorded in inspection log in instruction manu- deficiencies, including, but not limited to, corro- al and on equipment inspection grid label.
Safety Information Snap hooks, karabiners, and other connectors must be selected and applied in a compatible WARNING! Failure to understand and fashion. All risk of disengagement must be comply with safety regulations may result in eliminated. All snap hooks and karabiners serious injury or death.
Materials: Polyester, nylon, and aluminium. CE 0598, UKCA guardianfall.com Assembled in UK Checkmate Lifting & Safety Ltd T/A Guardian Fall New Road, Sheerness, Kent, ME12 1PZ United Kingdom Do Not Remove Labels Prior to use, understand all manufacturer instructions included with equipment at time of shipment.
Page 16
+44 (0) 1795 580 333 Checkmate Lifting & Safety enquiries@guardianfall.com t/a Guardian Fall New Road, Sheerness guardianfall.com Kent ME12 1PZ, United Kingdom Guardian® and its logo are registered trademarks of Pure Safety Group, Inc. dba Guardian Fall in the US and other countries.