Appendix - A Connecting Monitor To Standard Vcr - Lorex SY14S1044C-A Instruction Manual

APPENDIX - A
CONNECTING MONITOR TO A STANDARD VCR
Please see the diagram below for connecting your VCR to the Monitor.
NOTE:
Ensure the Standard VCR's channel is set to A/V Mode in order to ensure reception. Consult your
VCR's Owners Manual to set the VCR to this setting.
* Important Note: To record the video signal only from the monitor use the
VCR Audio/Video out terminals.
To record the video out signal including on screen display
features (e.g. Date, time, camera identification) use the
VCR Audio/Video Slave/Monitor out terminals.
-15-